Tech & Gadget

7 Ways to Deal with Water Damage on Your Cellphone, Easy and Effective

Published by
Mountain

7 Ways to Deal with Water Damage on Your Cellphone, Easy and Effective

How to deal with a cellphone that has been exposed to water is important information that you must know, especially if you often do activities near water.

Whether it's from a spilled drink, a dip in the pool, or getting caught in the rain, water can be your electronics' biggest enemy. If not handled immediately, the damage can get worse and may make your phone unusable.

Don't worry, in this article you will find a quick and easy solution to save your life. MOBILE PHONE your beloved from water danger!

Also read: 

How to deal with HP getting water in it

Here are 7 tips that you can try to deal with a cellphone that has been exposed to water in an easy, effective, and of course safe way.

Turn off your phone immediately after it gets wet

Turn Off Your Phone Immediately After It Gets Exposed to Water. Source: Eraspace

The first step you should take once your phone gets wet is to turn it off as soon as possible. This is very important to prevent further damage, especially if water gets into the phone's electronic components. If the phone is kept on, there is a risk of short circuiting or damage to the motherboards.

Don't hesitate to press the power button and turn off the phone as soon as you know the device has been exposed to water. If you can't turn it off the usual way, try pressing and holding the power button until the phone turns off. Don't wait too long because the longer the phone stays on, the greater the risk of damage.

Remove All HP Accessories and Components

Remove All HP Accessories and Components. Source: YouTube/Tech ADvent

After turning off the phone, the next step is to remove all accessories attached to your device. Remove the SIM card, memory card (SD card), and if possible, remove it as well battery.

These components can be protected from further damage if removed quickly. In addition, removing these accessories also makes it easier for you to clean the outside of the phone better.

For some phones that have non-removable batteries, you cannot remove them directly, so make sure to separate the other components.

Gently Dry Your Phone with a Microfiber Cloth

Gently Dry Your Phone with a Microfiber Cloth. Source: Pexels.

After the phone is turned off and the accessories are removed, the next step is to dry the outside of the phone. Use a microfiber cloth or soft tissue to absorb any water that sticks to the surface of the phone.

Avoid rubbing the cloth too hard to avoid causing the water to penetrate deeper. Focus on wet areas such as the screen, charging port, and speaker.

Don't forget to clean the small holes on your phone, such as the charger port and headphone jack, because water often gets trapped there. If your phone has a protective case, remove it as well so that the drying process is more optimal.

Use a Vacuum Cleaner, Not a Hair Dryer

Use a Vacuum Cleaner. Source: Mister Minit.

To dry the inside of the phone, it is best to avoid using a hair dryer. Although the heat from the hair dryer can evaporate the water, it can also damage the electronic components inside the phone, such as chips and motherboards.

Instead, you can use a vacuum cleaner on a low setting. This tool can help suck out any remaining water that is still inside the device without damaging the components.

If you don't have a vacuum cleaner, you can also try blowing air gently using a special air pump. Do not use hot air from a hair dryer or compressor because it can damage sensitive components inside the phone.

Use Rice or Silica Gel to Absorb Moisture

Use Rice or Silica Gel to Absorb Moisture. Source: MakeUseOf.

One of the most common ways to dry a water-damaged cell phone is to put it in a container filled with rice or silica gel.

Rice is known as a material that can absorb moisture, so it can help draw out the remaining water in the cellphone. You simply put the cellphone in a container filled with dry rice and leave it for 24-48 hours.

A more effective alternative is to use silica gel, which is often found in product packaging. Silica gel has the ability to absorb moisture faster than rice.

Don't Turn on Your Phone First

Don't turn on your cellphone first. Source: DreamsTime.

Even if your phone seems dry, you should not turn it on right away. Try to be patient and let your phone dry completely for 2-3 days before trying again.

If you turn on your phone straight away without making sure it's completely dry, there could be water left inside, which could cause serious damage.

If you feel the drying process is not optimal, do not hesitate to repeat it for a few days to get maximum results. This is better than having to buy a new cellphone if the damage gets worse.

Take it to the Service Center if the cellphone is not functioning normally

Take it to the Service Center if the cellphone is not functioning normally. Source: Freepik.

If after doing all the steps above your phone still does not function normally, you should take your device to an authorized service center. Professional technicians will examine more thoroughly and use special tools to repair damage to the phone's internal components.

Service centers can also provide further solutions to solve the problems you are facing. Make sure you take your cellphone to a trusted place to get the right treatment and avoid further damage.

By knowing how to deal with a waterlogged cellphone, you can now be calmer and act quickly if a similar incident occurs. Remember, the first step to take is to turn off the cellphone and dry it properly immediately.

Also read: 

Don't forget to always check VCGamers Marketplace to top up your game, to make your gaming experience even more exciting!

Mountain